Panasonic PT-DX500U Projector Description:
The 1-chip DLP™ PT-DZ570 Series projectors allow high-quality images to be projected in a wide range of operating conditions and applications. The PT-DZ570U provides unsurpassed image quality powered by 4,000 lumens, WUXGA (1920 x 1200) full HD+ resolution and RGB Booster for excellent color reproduction. Calibration is made easy with the built in Waveform Monitor.
Additional Features:
- A Full 4,500 lumens of brightness
and contrast of 2,000:1
The 300-watt AC lamp unit features an efficient light
focusing reflector. Using only a single lamp unit, the PT-DX500U offers 4,500 lumens and boasts a high contrast ratio of 2,000:1.
- RGB Booster Significantly Improves Color
Reproduction
The RGB Booster achieves high image quality with levels
of color reproduction and brightness that make each
color stand out. It combines Panasonic's proprietary Vivid
Color Control technology with a Lamp Modulation Drive
System for a 1-chip DLP™ projector that produces
bright and vivid colors. - Vivid Color Control
This unique control technology optimizes the use of
the color segment areas of the color wheel. It
increases the brightness of each RGB color by
minimizing the unallocated portions between the colors,
to achieve truly vivid coloring. - Lamp Modulation Drive System
With the advanced lamp modulation technology, the
projector is now able to control the lamp intensity for
each of the red, green, blue and white segments of
the color wheel separately. Because the actual light
output is controlled in relation to each color segment,
light usage is optimized, and color balance is
obtained without lowering the brightness. This results
in bright, vivid images with increased color fidelity. - Detail Clarity Processor 3 Brings
Depth and Clarity to Details
The frequency of the video signal is analyzed for each
scene, and distribution data is extracted for the ultra
high, high, medium and low-range frequencies. This
unique Panasonic image correction circuit optimally
enhances each area of the screen. High-precision
detection is applied from 2-dimensional horizontal/
vertical data to produce more natural, lifelike images
with high definition.
- Daylight View Premium for
Better Color Perception
This function corrects the image quality to project sharp,
clear images even in brightly lit rooms. A luminance
sensor measures the ambient brightness, and a realtime
adjustment function optimizes sharpness and
brightness according to the surroundings. This adjustment
function also works together with the Detail Clarity
Processor 3 to enhance the realism and vividness of
projected images. This makes images easier to view and
offers high contrast.
- Waveform Monitor Function
When the output level of the source device fluctuates
due to the performance of the device or its cable
connections, the original black and white levels of the
image content cannot be reproduced correctly. With the
PT-DZ570U, you can view the waveforms on the screen
and adjust the settings either automatically or manually
as you prefer. - DICOM Simulation Mode
This imaging mode is similar to DICOM Part 14, which is
a medical imaging standard. It reproduces X-ray images
with remarkable clarity. It also allows information to be
shared by many viewers on a large screen, such as
during conferences or training courses.
- Advanced Technologies for
Excellent Image Quality
- 3D color management system
- Full 10-bit image processing
- Progressive cinema scan (3:2 pulldown)
- Dynamic sharpness control
- Digital noise reduction
- IP conversion
- AI scene control
-
Improved Reliability
and Reduced
Maintenance
Newly Designed Original Cooling System
The cooling system is newly designed to optimize the
airflow inside the unit. As a result, it offers better cooling
efficiency and allows the projector to be used in ambient
temperatures up to 45°C (113°F) -
Lamp and Lamp Air Filter Replacement
Cycle of 2,000 Hours
The new cooling system combines with a dust-resistant
design based on a sealed optical block to achieve a
lamp and lamp air filter replacement cycle of 2,000
hours. This greatly reduces maintenance hassles.
- Easy Lamp Replacement
For easier maintenance, you can
replace the lamp from the rear.
The lamp is easily replaced even
after the projector is installed on
the ceiling.
- Quiet, 29 dB Operation
An original cooling system enhances the compact body
and enables the projector to operate at a quiet 29 dB.
- Web Browser Control over a Wired LAN
The PT-DX500U can be easily operated remotely
over a LAN, because it is done using the computer’s
Web browser. Furthermore, the projector sends an email
message to notify the operator when an error has
occurred, or a lamp needs to be replaced.
- Multi Projector Monitoring & Control
Software Ver. 2
Panasonic's original freeware "Multi-Projector Monitoring
& Control Software Ver. 2" allows the user to control and
monitor multiple projectors at the same time over a
wired LAN. When a problem occurs, an alarm message
is sent to the monitoring/controlling PC.
- H/V Lens Shift and 2x Zoom Lens
In new installations, the horizontal/vertical lens shift lets
you accommodate a wide range of room sizes and
shapes. And when replacing existing projectors, the 2x
zoom greatly enhances your ease of installation and can
reduce costs by permitting the use of existing mounting
positions and cablings. -
Flexible Angle Setting
The unit can be rotated 360°
vertically. This means you can
install it at any up-and-down
angle you wish to accommodate
different installation conditions.
- Lens-centered Design
A lens-centered, symmetrical design provides ease of
installation, eliminating the need for any special considerations
when planning the installation site.
- Multiple Terminals
Interfaces include a DVI-D and HDMI inputs. The serial
terminal (RS-232C) has an Emulate function that lets
you continue using existing control systems when replacing
a previous Panasonic model. It is also possible to
output audio during Standby mode. This is convenient
when connecting an external audio system through the
projector.
- Eco Management Functions
A number of functions are provided to reduce power
consumption. They adjust the brightness according to the
ambient light conditions and
reduce the lamp power when
there is no signal input or the
projector is in the AV Mute mode.
|
